Electrical JD · Plants, projects, design

Electrical Engineer Job Description Template

Use this electrical engineer job description to hire for plant maintenance, building and MEP projects, panel manufacturing, solar installation or design offices in India. Fill in the voltage level, equipment, licence needs, shifts and CTC, then use the screening questions, safety rules and practical test below to compare applicants fairly.

Free JD templateReady to postScreening questionsSkills to test

Free listing for paid roles from ₹8,000/month (live within 2 working days after review) · Paid plans go live instantly after company verification · GST invoice

Young engineer operating a machine in a manufacturing workshop
Quick answer

What should an electrical engineer job description include?

Say which electrical role you mean: plant maintenance, project execution, panel manufacturing, design or testing and commissioning. List the systems involved, such as HT and LT switchgear, transformers, motors, drives, DG sets and PLCs, the highest voltage the engineer will work on, and the drawings and software used. Add the qualification, any licence your state requires for the work, shifts, place of posting, safety duties, the CTC range and the selection steps.

Copy-ready job description

Replace every [placeholder] before sending. Copy the text or download it as a .txt file and paste it into your letterhead or email.

Electrical engineer job description (maintenance, projects or design)
Job title: Electrical Engineer – [Maintenance / Projects / Design / Testing & Commissioning]
Company: [Company Name]
Place of work: [Plant, project site or office, City, State] | Site travel: [None / X days a month]
Shifts: [General shift, Start–End / rotating shifts with on-call duty for breakdowns]
Experience: [Fresher / X–Y years] on [LT only / HT up to [X] kV] systems
Openings: [Number] | Reports to: [Electrical Head / Project Manager / Design Lead]
CTC: ₹[Amount] – ₹[Amount] per annum [fixed, variable, shift or site allowance]
[Internship version: stipend of ₹[Amount] per month for [Duration]]

Role summary
[Company Name] needs an electrical engineer to keep [the plant's power distribution / a building or infrastructure project / our panel and design work] safe, reliable and to specification. You will work with technicians, contractors and [production / project / design] teams, and every job follows our permit and isolation system.

Responsibilities [retain the lines that fit your role]
- Operate and maintain [transformers, HT/LT panels, PCC and MCC, DG sets, UPS, APFC panels], with logbooks and maintenance records
- Carry out preventive and breakdown maintenance on motors, starters, VFDs, lighting and earthing
- Troubleshoot control circuits and [PLC / HMI / SCADA] faults using wiring diagrams and the program on [platform name]
- Monitor energy consumption, power factor and maximum demand, and propose savings
- Projects: check single-line diagrams, cable schedules and BOQs; supervise cable laying, terminations, earthing and panel erection by contractors; certify measurements for billing
- Testing and commissioning: carry out insulation resistance, earth resistance and functional tests and record them in pre-commissioning checklists
- Design: prepare load calculations, cable sizing, SLDs and lighting layouts in [AutoCAD Electrical / ETAP / DIALux]
- Coordinate with [the electricity distribution company / electrical inspector / vendors] for approvals, inspections and service visits as required
- Issue or receive work permits, apply lockout-tagout and test for dead before work starts

Requirements
- B.E./B.Tech in Electrical or Electrical & Electronics Engineering [or Diploma in Electrical Engineering with relevant experience]
- [Fresher / X–Y years] in [industry, e.g. manufacturing plant, MEP contracting, panel building, solar EPC]
- [Name of electrical supervisor certificate or licence, only if your state requires it for this work]
- Willing to work shifts and attend breakdowns as per the on-call roster

Skills and tools
- Reading SLDs, control wiring diagrams and panel GA drawings
- Motors, DOL and star-delta starters, VFDs, breakers and protection relays
- Multimeter, clamp meter, insulation resistance tester and earth tester
- [PLC and HMI programming / AutoCAD Electrical / ETAP], MS Excel, [CMMS or SAP PM]
- Sound knowledge of electrical safety practice and the regulations that apply to our installations

Benefits
[Shift or site allowance], [canteen / transport / accommodation], [PF, ESI and insurance as per company policy and applicable law]

How to apply
Send your resume through the MyInternships.in job listing or to [careers email], mentioning the highest voltage level you have worked on and one fault you diagnosed. Selection: [written and diagram test] → [technical interview] → [HR discussion].

No fee is charged to candidates at any point in our hiring process.

This template is general guidance for employers in India, not legal advice. Adapt it to your company policies, the offer you actually made and the rules that apply to your organisation, and have contracts reviewed by a qualified adviser.

Pick the electrical role and voltage level first

An electrical engineer in a process plant, at an MEP contractor and at a panel builder faces different equipment, risks and working hours. Write one listing per role and state the highest voltage involved: an LT-only building job and an HT substation role need different experience, authorisation and supervision.

Role focusWhere it is commonSystems and tools to name
Plant maintenanceFactories, process plants, utilitiesHT/LT distribution, motors, VFDs, PLCs, DG sets, energy records
Building and MEP projectsContractors, developers, facility management firmsLT panels, cabling, earthing, lighting, BOQ and billing
Panel manufacturing and testingSwitchgear and control-panel makersGA and wiring drawings, routine tests, test reports
DesignConsultants and EPC firmsSLDs, load and cable calculations, AutoCAD Electrical, ETAP, DIALux
Solar and renewable projectsRooftop and utility-scale installersModules, inverters, DC cabling, earthing, net-metering paperwork

See also: Hire automation engineers Hire project engineers

Licences, authorisation and electrical safety

Electrical installations in India must meet the Central Electricity Authority's safety regulations, and states issue their own licences and competency certificates for electrical contractors and supervisors. If the role signs off installations or supervises licensed work, check current rules in your state and name a certificate in the JD only when the work truly needs it. Do not demand a licence a fresh graduate cannot yet hold; say whether you will support the candidate in obtaining it.

Then describe how electrical work is controlled at your site:

  • Work only on equipment that is isolated, locked out, tagged and tested dead, under a written permit
  • HT switching only by persons authorised in writing
  • PPE matched to the hazard: voltage-rated gloves, insulated tools, safety shoes, and face shields and arc-rated clothing where arc flash is a risk
  • Training in electric-shock first aid, CPR and the site emergency plan
  • No live testing by trainees without direct supervision

Fresher and experienced versions of the JD

A fresher JD should describe supervised work: shift logbooks, preventive maintenance alongside a senior engineer, drawing updates, test records and learning the permit system before handling any isolation alone. Ask for fundamentals in machines, power systems and protection, plus project work or industrial training, and name the growth path, for example to shift engineer once signed off.

An experienced JD should list what the engineer will own: a substation, the plant's preventive maintenance plan, a project's electrical package or a set of design deliverables. Add contractor management, inspections and energy reporting where relevant, and say which decisions the engineer can take alone.

See also: Hire electrical engineering interns Graduate engineer trainee JD for batch hiring

Screening questions for electrical engineering candidates

Listen for safe sequence as much as technical knowledge. A candidate who reaches for a tester before a spanner is usually the one you want on night shift.

  • ‘A three-phase motor hums but will not start after maintenance. What are your first checks?’
  • ‘Explain, step by step, how you would isolate an LT feeder and prove it dead.’
  • ‘The plant's power factor has dropped and the electricity bill shows a penalty. Where would you look?’
  • ‘Which factors decide the cable size for a motor feeder?’
  • ‘A contractor's earth-pit reading is above the design value. What do you do before accepting the work?’
  • Automation roles: ‘Here is a ladder rung. Why does the output never energise?’
  • Freshers: ‘Which instruments have you used yourself, and on what equipment?’

A practical test with no live work

Test on paper, on a de-energised training panel or on a simulator, never on live equipment. Keep it to under an hour and use one scoring sheet for every candidate.

  • SLD reading: mark breakers, protection and metering, and find a deliberately planted error.
  • Control wiring: complete or correct a star-delta starter diagram, including the interlocks.
  • Isolation sequence: write the steps to isolate a motor for maintenance and return it to service.
  • Cable sizing worksheet for project and design roles, with the assumptions stated.
  • PLC logic fault for automation roles, on a simulator or a printed program.

See also: Interview scorecard template

Posting an electrical engineering job on MyInternships.in

Internships and fresher jobs are what MyInternships.in lists, so the fresher, trainee and junior versions of this JD fit well. Open the AI hiring assistant, tell it the role focus, voltage level, shift, city and CTC, and it writes a draft title, description and skills list in a guided chat of about two minutes; compare the live preview with your template before you submit.

Each company is verified before its listings go live. One role paying ₹8,000/month or more can go on the free plan, which the team reviews within 2 working days; applicants' resumes and contact details need a paid plan, and Starter and Growth listings go live instantly. You can also search the candidate database in plain English, for example ‘EEE fresher in Coimbatore with PLC training’, and the AI ranks the matches.

See also: Post an electrical engineering role See the plans Search electrical engineering candidates

Frequently asked questions

How is an electrical engineer different from an electrician?

An electrician usually holds an ITI or similar trade qualification and does the hands-on wiring, terminations and repairs, and may need a state permit or licence for some work. An electrical engineer holds a degree or diploma and plans, checks, supervises or designs that work and signs off records. Write separate JDs; merging them confuses candidates and blurs the pay band.

Should the JD ask for an electrical licence or supervisor certificate?

Only when the work requires it. Rules on who may carry out, supervise or certify electrical installations are set at state level, so check what applies to your installations before writing the requirement. If a certificate is needed, name it exactly, and say whether you will support a fresher in obtaining it later.

Can a fresher electrical engineer work on HT equipment?

Only after training, and only within the limits of a written authorisation. In the first months a fresher should observe switching operations, maintain records and assist on isolated equipment under supervision. State in the JD that HT switching is restricted to authorised persons, so candidates can see how their responsibility will grow.

Are EEE graduates suitable for an electrical engineer role?

Usually, yes. Electrical and electronics engineering courses cover machines, power systems and control, so EEE graduates fit most maintenance, project and design roles. For automation-heavy jobs, instrumentation and electronics graduates may also suit. Name the branches you accept rather than writing ‘any engineering graduate’, which makes technical screening inconsistent.

Which software should an electrical design engineer JD mention?

List the tools your team uses: AutoCAD or AutoCAD Electrical for drawings, ETAP or a similar package for load flow and short-circuit studies, DIALux for lighting, and Excel for calculations. Say whether equivalent software is acceptable. For maintenance roles, PLC programming software and a CMMS or SAP PM matter more than design tools.

Should the JD mention on-call duty and night shifts?

Yes. Breakdowns do not wait for office hours, so explain the shift pattern, how often the engineer is on call, how call-outs are compensated as per company policy and what transport is available at night. Check the rules for night work in your state. Candidates who know this in advance are far less likely to resign after joining.

How should the CTC be shown for an electrical engineer?

Show a range per annum with the fixed and variable split, plus the allowances that matter in this role, such as shift, on-call, site or travel allowances. Base the figures on your own pay structure rather than numbers seen elsewhere, and keep the offer letter consistent with what the JD promised.

What KPIs suit an electrical maintenance engineer?

Pick measures the engineer controls: unplanned electrical downtime, mean time to repair, preventive maintenance completed on schedule, energy use per unit of output, power factor and permit compliance. Name the measures in the JD and agree the actual targets after joining, based on your plant's own records.

Can we hire electrical engineering interns?

Yes, for supervised work such as drawing updates, energy data analysis, maintenance records, test documentation and panel inspections with a senior engineer. Interns should never work on live equipment or switch circuits on their own. State the monthly stipend, duration and project, and issue any letter the college needs for industrial training.

Should solar or EV charging roles use a separate JD?

Yes. Solar and EV charging projects add DC systems, inverters or chargers, string and earthing design, site surveys and paperwork with the distribution company, while plant maintenance roles centre on AC distribution and motors. A separate listing with the right skills attracts candidates who have actually worked on those systems.

Can I post an electrical engineer job on MyInternships.in?

Yes. Fresher and junior electrical roles and electrical engineering internships can be posted for any Indian city through the AI hiring assistant, after your company is verified. A single role paying ₹8,000/month or more qualifies for the free plan; paid plans go live instantly and include applicants' contact details and resumes.

Plans and pricing for employers

Free
₹0
1 listing
  • 1 internship or job listing
  • Live for 30 days once approved
  • Reviewed by our team, live within 2 working days
  • Only for paid roles offering ₹8,000/month or more
  • Applicant contact details and resumes need an upgrade
Most popularStarter
₹999
incl. GST · 30 days
  • 5 internship or job postings
  • Goes live instantly after company verification
  • Full applicant contact details and resumes
  • Email support
Growth
₹1,999
+ GST · 30 days
  • 15 internship or job postings
  • Goes live instantly after company verification
  • Priority support and AI candidate matching
  • Full applicant contact details and resumes
Enterprise
Custom
volume hiring
  • Custom volume hiring and campus drives
  • Unlimited resumes
  • Dedicated sourcing team
  • SLA and GST invoice

Prefer to search candidates yourself? The candidate database lets you search, then unlock resumes and contact details with credit packs of ₹999 (incl. GST) or ₹1,999 (incl. GST), each valid for 30 days. Describe the role in plain English and the AI ranks matching candidates.

Prices in INR as of 21 November 2026. Pay securely by Razorpay; a GST invoice is issued for every paid plan (add your GSTIN at checkout). Enterprise pricing on request.

Post your electrical engineering opening

Share the role focus, voltage level, shifts and CTC with the AI hiring assistant and check its draft in the live preview. The listing goes live once your company is verified.

Post a jobPricing