On a platform where 21,874 candidates list Python, the leading core engineering tools do not reach a tenth of that figure. MATLAB is listed by 1,499 candidates registered on MyInternships.in, AutoCAD by 1,459 and SolidWorks by 400.
For manufacturing firms, design consultancies and engineering contractors, those three numbers describe the pool. It is real, it is concentrated in a few cities, and it rewards employers who write precise requirements.
Level at the top, a long way down to third
Out of 55,557 candidate profiles that list skills, counted on 1 Oct 2026, MATLAB sits on 2.7%, AutoCAD on 2.6% and SolidWorks on 0.7%. An engineer who has entered all three contributes to all three totals.
MATLAB and AutoCAD are separated by 40 profiles. SolidWorks is listed between a quarter and a third as often as either.
| Where | MATLAB | AutoCAD | SolidWorks |
|---|---|---|---|
| All India | 1,499 | 1,459 | 400 |
| Bengaluru | 221 | 165 | 43 |
| Chennai | 148 | 113 | 48 |
| Hyderabad | 147 | 147 | 35 |
| Pune | 105 | 143 | 33 |
| Delhi | 57 | 69 | 20 |
| Mumbai | 55 | 59 | 8 |
| Nagpur | 13 | 27 | 7 |
Each city has a different lead tool
Bengaluru is the strongest MATLAB city by a distance, with 221 profiles, and MATLAB leads AutoCAD there. Chennai shows the same order and also has the largest SolidWorks group in the country, 48.
Pune flips it. AutoCAD, at 143, is well ahead of MATLAB at 105, which fits a pool oriented more towards drafting and mechanical design than towards simulation and signal work. Hyderabad is an exact tie between the two, at 147 each.
Delhi, Mumbai and Nagpur all have AutoCAD in front. Nagpur's AutoCAD count is about double its MATLAB count. Mumbai's SolidWorks figure, eight, is strikingly low for a city of its size, so a 3D-modelling role tied to Mumbai may need a wider search area.
The three tools signal three kinds of engineer
It is tempting to lump these together as "CAD and such". They indicate different training.
- AutoCAD suggests two-dimensional drafting and is common to civil, mechanical, electrical and architectural backgrounds.
- SolidWorks suggests three-dimensional part and assembly modelling, typically mechanical or product design.
- MATLAB suggests numerical work: control systems, signal processing, simulation, and is common among electronics and electrical graduates.
A JD that lists all three as required is asking for an unusual combination. Decide which describes the daily work and require that one alone.
If the role spans two of them, name the primary tool as required and the other as an advantage. A design engineer who drafts in two dimensions most days and occasionally models a part is a different hire from one who lives in assemblies.
Small pools make every extra condition expensive
With 400 SolidWorks profiles nationally, each additional filter removes a meaningful share of what is left. Requiring a particular city, immediate joining, and a second specialised tool can reduce a shortlist to almost nothing.
Employers who hire successfully from small pools tend to do three things. They state the single must-have clearly. They are flexible on location where the work allows, or they are explicit about relocation support in general terms. And they move quickly once a suitable candidate applies, because the same few profiles are visible to everyone.
Screening for drawing and modelling skill
For drafting and modelling roles, ask for files or images of past work: a drawing with dimensions and tolerances, an assembly, a rendered part. Then ask about one decision in it. Why that tolerance, why that view, why that material?
For MATLAB-based roles, ask what the candidate modelled and how they validated the result against something real. A person who can explain where their simulation departed from measurement has done the work.
A short practical test is fair and common in this field. Keep it small and relevant, and tell candidates in advance what software version they will use.
Ask about the workshop as well as the screen. Candidates who have seen their drawing turned into a physical part, in a college lab or during training, usually understand why a dimension matters, and that understanding is what separates a drafter from an engineer.
Overlap with architecture and interiors
A portion of AutoCAD-listing candidates come from architecture and interior design backgrounds, where the tool is part of everyday practice. If that is the talent you need, a general engineering search is not the most direct route.
We maintain separate pages for employers who want to hire architects, hire interior designers or post architecture jobs, and those are the better place to begin.
How far to trust the numbers
These counts reflect what candidates have listed on their MyInternships.in profiles and nothing more. Core engineering students who are active elsewhere will not appear, and a listed tool does not confirm proficiency. Use the figures to compare relative pool sizes on our platform, city against city and tool against tool.
Next steps for core engineering employers
Pick the one tool the job depends on, check your city in the table, and ask for work samples. When you are ready to recruit, hire engineering talent on MyInternships.in with a JD built around the drawings or models the person will produce.


